Easy electronic limits.
Can be parallel wired for convenient and cost saving installation.
Best choice for automation system where electrically controlled 4 core motors are required.
Torque stop function for use with stoppers.
240V / 50Hz
Electronic limit switch
For use with C-Bus and similar systems
Parallel wiring compatible
Counter balanced noise suppression
Suitable for: Large internal Blinds, most External Drop Blinds, Non-Cassette Folding Arm Awnings and Roller Shutters
Use with WSB01 limit setting tool (available separately)
This motor is recommended for all external straight drop awning products.
Limits may be set by using either the WSB01 limit setting tool or by using the button on the motor head.
These motors cannot be protected or controlled by Sun/Wind or Motion sensors. Any protective features must be provided by the control system operating the motors.
Rated Torque (Nm) 30
Output Speed (rpm) 17
Nominal Consumption (W) 226
Nominal Voltage (V) 240
Nominal Current (A) 0.95
Running Time (min) 4
Projection Index (IP) 44
Total Length (mm) 570
Maximum Turns (Turn) Infinity
Net Weight (Kg) 2.20
Sales & Support
Should you have any enquiries about any of our products, our experienced technical team are here to assist.
+61 2 4355 4775