This is the most popular motor in the country for zip systems.
Suitable for almost any size zip system or external blind.
Has upwards torque sensing, so will stop on stoppers if required.
Also suitable for most roller shutters.
Power Specifications – 240V / 50Hz
Built in Remote Receiver
Wireless limit set up
The number one motor in the country for Zip or side channel systems.
Due to the torque stop function, this motor is ideal for all external straight drop systems. This protective feature can be used to stop on stoppers at the top limit in side channel systems, and can also be used to tension the fabric when the awning is down. A top limit is set normally and the torque stop function can be used in conjunction. Suitable for use with RS001 and RS002, Sun/Wind sensors.
When used with Sun/Wind sensors, this motor detects a pulse from the sensor issued every 20 minutes. If the Awning is down and does not receive a signal from the sensor for half an hour, it will rise automatically as a protective measure assuming the sensor has failed.
10/27 & 30/17 versions of this motor are available both with and without Molex connectors.
Suitable for: Extra Large internal Blinds, Zip systems, most external Drop Blinds like fixed or wire guided blinds, and Roller Shutters
Able to lift up to 51Kg (bar and skin) on a 63mm tube, it can easily deal with the largest of drop blinds and is also worth considering for non-cassette folding arm awnings.
- Rated Torque (Nm) 30
- Output Speed (rpm) 17
- Nominal Consumption (W) 226
- Nominal Voltage (V) 240
- Nominal Current (A) 0.95
- Running Time (Min) 4
- Protection Index (Ip) 44
- Total Length (mm) 570
- Maximum Turns infinite
- Net Weight (Kg)2.45
- Lifting Capacity 51Kg on 63mm tube
Sales & Support
Should you have any enquiries about any of our products, our experienced technical team are here to assist.
+61 2 4355 4775