For use with the TYB002 solar panel with internal battery storage.
Suitable for zip systems up to 5m wide x 2.5m drop.
Torque stop function for tensioning, or for use with stoppers.
The WSERD50 15/12 is an external 50mm DC motor. It has all the same great features as our WSER50 series AC motors, like tensioning and upwards obstacle detection, so it will stop on stoppers at the top limit if required. This is a very handy feature for side channel external straight drop systems as the blinds do not always roll up evenly, and without stoppers the base bar can end up inside the hood box, even if the motor has stopped in the correct position. Able to lift around 26kg on 63 mm tube, this will be compatible with the vast majority of external straight drops and medium size roller shutters.
This item is designed to be used with the TYB002 solar panel with internal battery storage. The TYB002 contains 4.4Ah of storage and will take about 8 days in full sun to charge completely. Once charged you should get about 30 – 40 days of twice a day usage without further charge. In case excessive usage is required or good positioning of the solar panel is not possible, there is a charging socket on the side of the unit and it comes supplied with the charger in the box.
- Rated Torque (Nm) 15
- Output Speed (rpm) 12
- Nominal Consumption (W) 96
- Nominal Voltage (V) 12v DC
- Nominal Current (A) 8
- Running Time (Min) Infinite
- Protection Index (IP) 44
- Total Length (mm) 565
- Maximum Turns infinite
- Frequency MHz 433.92
- Code Type Rolling
- Lifting Capacity 30kg on 50mm tube
- Power Requirements 12 volts, 8 Amps
Sales & Support
Should you have any enquiries about any of our products, our experienced technical team are here to assist.
+61 2 4355 4775